Johnstech's Handler & Multi-Site Integration Services

Your Challenge: Maximize First Pass Yield and throughput

The Solution: Apply performance contacting that meets or exceeds device and handler requirements

You need to tune your electrical and mechanical applications to maximize first pass yield and optimize throughput. Look no further than Johnstech, which has charted the course for custom contact integration for Automatic Test Equipment (ATE) with a Contactor-device-handler design matrix applied successfully in more than 5,000 designs. Our sales staff and applications engineers work closely with each customer to insure that every application has been carefully tuned electrically and mechanically to meet or exceed device and handler requirements.

When reviewing your ATE requirements, remember that Johnstech is the leader for maximum yields, throughput, and the industry’s highest OEE’s. We understand docking, Contactor and handler integration like no other company.

Each design contains:

Design-specific data sheet
Parts list
Spares list
Contactor layout
Alignment plate layout if applicable
Load board footprint
PCB footprint layout documentation
Electrical and mechanical specifications
Third-party S parameter analysis
Maintenance and inspection guides
Technical application notes
Handler application notes

Johnstech’s handler and manual test configurations include over 5000 designs. The table below represents the more popular combinations and is a fraction of the overall handler integration database. Contact Johnstech for more information if your Handler isn’t listed below.

Multi-Site Testing
Make	Model	Device Type	Housing Size MM
Advantest	M4152/4172	QFP, SO	Various
Aetrium	5050T	QFN, LCC	38.10mm x 38.10mm
Aseco	VT8000	QFP, SO	56.00mm x 73.50mm
Delta	1688	QFP	63.50mm x 73.66 mm - Single/Dual Site, 56.00mm x 73.50mm - Multi Site
	4000 Series	SO	45.00mm x 45.00mm
	Flex	QFP	63.50mm x 73.66mm - Singe/Dual Site, 56.00mm x 73.60mm - Multi Site
	RFS	QFP	63.50mm x 73.66mm - Single/Dual Site, 55.80mm x 73.50mm - Multi Site
	Castle	QFN, QFP	38.10mm x 60.00mm - Multi Site, 56.00mm x 60.00mm - Multi Site
HYAC	200 Series	QFN	38.10mm x 38.10mm
Ismeca	Various	QFN, DFN, LGA, SO	25.00mm x 25.00mm
Kuwano	LT-9700	SO	36.00mm x 35.80mm
MCT	7632	QFN, QFP, PLCC, SO	Various
MultiTest	9105	QFN	73.66mm x 73.66mm
	9308/9320/9910	SO	33.00mm x 35.80mm Small Body, 35.4mm x 43.7 Large Body
	9510	QFN, QFP, PLCC, SO	56.00mm x 62.00 Quad Site, 135.00 x 155.00 Single Site
Rasco	SO1000/1100/2000	QFN, SO	44.00mm x 35.80mm
Seiko Epson	HM2000	QFN, QFP, PLCC, SOP, TSOP	63.50mm x 73.66 - Dual Site
	HM3000/HM3500	QFN, QFP, PLCC, SOP, TSOP	56.00mm x 73.50mm - Triple Site
	HM4000	QFN, QFP, PLCC, SOP, TSOP	38.10mm x 38.10mm
	NS50000/6000	QFN, QFP, PLCC, SOP, TSOP	63.50mm x 73.50mm
SRM	D246/D248	QFN, QFP, SO	25.00mm x 25.00mm
Synax	SX121	QFN, QFP, SO	25.00mm x 25.00mm
	SX141	QFN, QFP, SO	63.50mm x 73.66mm - Dual Site
	SX1201	QFN, QFP, SO	63.50mm x 73.66mm
	SX1211	QFN, QFP, SO	63.50mm x 73.66mm - Dual Site
	SW1501	QFN, QFP, SO	63.50mm x 73.6mm - Quad Site
Tesec	9210	QFN, QFP, SO	84.00mm x 84.00mm
Tesec	9588	QFP, SO	28.00mm x 28.00mm

Single Site Testing
Aetrium	1000 Series	QFN, QFP, PLCC, SO	38.10mm x 38.10mm
	5050T/5500/55V6/55V8	QFN, LCC	38.10mm x 38.10mm
	900A	QFP, PLCC, SO	63.50mm x 73.66mm
Asahikasei	Asahikasei	QFP, SO	63.50mm x 73.66mm
Aseco	S170D	SO	56.00mm x 73.50mm
Aseco	S130	QFP, SO	63.50mm x 73.66mm
Delta	717	SO	63.50mm x 73.66m
Kuwano	LT-820	QFP, PLCC, SO	63.50mm x 73.66mm
Matsushita	Matsushita	QFP, SO	63.50mm x 73.66mm
MCT	5100	SO	44.00mm x 44.00mm, 32.00mm x 32.00 (older designs)
Motorola		QFN, QFP	25.00mm x 25.00mm
MultiTest	8503	SO, PLCC	72.00mm x 79.00mm
MultiTest	8704	SO	55.00mm x 55.00mm
Sowa	Sowa	SO	63.50mm x 73.66mm
Tes America	86xx	QFP	63.50mm x 73.66mm
Tes America	89xx	QFP	63.50mm x 63.50mm, 63.50mm x 73.6mm
Tesec	8710	SO	84.00mm x 84.00mm